Compaq Evo n1000v Compaq Evo Notebook N1020v Series, N1000v Series and Compaq - Page 163
Removing the Optical Drive Alignment Rails, Fan
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Removal and Replacement Procedures h. Top cover, microphone, and TouchPad cable (Section 5.20) i. Fan (Section 5.21) 2. Remove the two TM2.5 × 5.0 screws 1 that secure the optical drive front alignment rail to the base enclosure (Figure 5-43). 3. Remove the front alignment rail 2 from the base enclosure. 4. Remove the two TM2.5 × 5.0 screws 3 that secure the optical drive rear alignment rail to the base enclosure. 5. Remove the rear alignment rail 4 from the base enclosure. Figure 5-43. Removing the Optical Drive Alignment Rails ✎ The optical drive alignment rails are included in the Miscellaneous Plastics/Hardware Kit, spare part number 285541-001. Maintenance and Service Guide 5-57
Removal and Replacement Procedures
Maintenance and Service Guide
5–57
h.
Top cover, microphone, and TouchPad cable
(Section 5.20)
i.
Fan (Section 5.21)
2.
Remove the two TM2.5 × 5.0 screws
1
that secure the optical
drive front alignment rail to the base enclosure (Figure 5-43).
3. Remove the front alignment rail
2
from the base enclosure.
4.
Remove the two TM2.5 × 5.0 screws
3
that secure the optical
drive rear alignment rail to the base enclosure.
5. Remove the rear alignment rail
4
from the base enclosure.
Figure 5-43. Removing the Optical Drive Alignment Rails
✎
The optical drive alignment rails are included in the
Miscellaneous Plastics/Hardware Kit, spare part number
285541-001.