Compaq ML350 Compaq ProLiant ML350 Generation 2 Server Setup and Installation - Page 139
Minimum Hardware Configuration, Table F-3
UPC - 613326311370
View all Compaq ML350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
F-4 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide Minimum Hardware Configuration Make sure that your server meets the requirements for minimum hardware configuration. During the troubleshooting process, it may be necessary to reduce your system to its minimum configuration, reinstalling options one at a time to determine the cause of failure. Component Processors Server Feature Board Fans Memory PPM Table F-3 Minimum Hardware Configuration Minimum Specification A processor must be installed in a processor socket. The Server Feature Board is installed in a dedicated expansion slot. A system fan must be installed and connected to the system board. At least one slot must be populated with an ECC 133-MHz Registered SDRAM DIMM. A PPM must be inserted into the PPM slot. Also refer to the Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide at the Compaq website: www.compaq.com/support