Compaq Portable 386 Compaq Portable 386 Personal Computer Maintenance and Serv - Page 27
Table 6-3. Memory Error Codes 2xx - xx Range, Memory machine ID
View all Compaq Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
112 - 08 Speed test unable to enter auto mode. 112 - 09 Speed test unable to enter high mode. 112 - 10 Speed test high mode out of range. 112 - 11 Speed test auto mode out of range. 112 - 12 Speed test variable speed mode inoperative. 113 - 01 Protected mode test failed. Error Code Error Description Recommended Action 114 - 01 Speaker test failed. 1. Verify that speaker is connected. 2. Replace the speaker and retest. 3. Replace the system board and retest. 199 - 00 Installed devices test 1. Check system configuration. failed. 2. Verify cable connections. 3. Check switch settings. 4. Run SETUP. 5. Replace system board and retest. Table 6-3. Memory Error Codes (2xx - xx Range) Error Code Error Description Recommended Action 201 - 01 Memory machine ID The following steps apply to error test failed. codes 201 - 01 through 202 - 03: 202 - 01 Memory system ROM 1. Replace plasma display checksum failed. controller board. 2. Replace the system ROM and 202 - 02 RAM/ROM system test failed. retest. 3. Replace the system board and 202 - 03 RAM/ROM protect test failed. retest. 203 - 01 Memory write/read test failed Replace the appropriate memory test failed. module(s) or memory board and retest for error codes 203 - 01 203 - 02 Error during saving program through 210 - 03. Refer to memory in write/read test. Section 6.4. 203 - 03 Error during restore of program in write/read test 204 - 01 Memory address test failed