Compaq Presario B1200 Compaq Presario B1200 Notebook PC - Maintenance and Serv - Page 46
Camera module, and the four Torx T8M2.5×6.0 screws
View all Compaq Presario B1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Camera module Description Camera module Spare part number 454013-001 Before removing the camera module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove the camera module: 1. Turn the computer right-side up, with the front toward you. 2. Open the computer as far as possible. 3. Remove the four rubber screw covers (1) and the four Torx T8M2.5×6.0 screws (2) that secure the display bezel to the display assembly. 4. Flex the outside edges of the left and right upper corners(1) of the display bezel until the bezel disengages from the display enclosure. 38 Chapter 4 Removal and replacement procedures