Compaq Presario CQ40-400 Compaq Presario CQ40 Notebook PC - Maintenance and Se - Page 44

Hard drive, Lift the left side

Get Compaq Presario CQ40-400 - Notebook PC PDF manuals and user guides View all Compaq Presario CQ40-400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Hard drive NOTE: The hard drive spare part kit includes a hard drive bracket. Description 160 GB, 5400 rpm 250 GB, 5400 rpm 320 GB, 5400 rpm 500 GB, 5400 rpm Spare part number 532337-001 532338-001 532339-001 532340-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.5×5.0 captive screws (1) that secure the hard drive cover to the computer. 3. Lift the left side (2) of the hard drive cover, swing it to the right, and remove the cover (3). The hard drive cover is included in the Plastics Kit, spare part number 486862-001. 4. Remove the three Phillips PM2.0×4.0 screws (1) that secure the hard drive to the computer. 36 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
Hard drive
NOTE:
The hard drive spare part kit includes a hard drive bracket.
Description
Spare part number
160 GB, 5400 rpm
532337-001
250 GB, 5400 rpm
532338-001
320 GB, 5400 rpm
532339-001
500 GB, 5400 rpm
532340-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
34
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.5×5.0 captive screws
(1)
that secure the hard drive cover to the
computer.
3.
Lift the left side
(2)
of the hard drive cover, swing it to the right, and remove the cover
(3)
. The hard
drive cover is included in the Plastics Kit, spare part number 486862-001.
4.
Remove the three Phillips PM2.0×4.0 screws
(1)
that secure the hard drive to the computer.
36
Chapter 4
Removal and replacement procedures