Compaq Presario CQ45-100 Compaq Presario CQ45 Notebook PC - Maintenance and Se - Page 89
Lift the right side of the system board, until it rests at an angle
View all Compaq Presario CQ45-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
2. Disconnect the following cables from the system board (if still connected): ● (1) Modem cable ● (2) Audio board cable ● (3) Fan cable 3. Remove the two silver captive Phillips PM1.5×9.0 screws on the expansion connector (1). 4. Remove the two black Phillips PM2.5×6.0 screws that secure the system board to the computer (2). 5. Lift the right side of the system board (1) until it rests at an angle (2). Component replacement procedures 81
2.
Disconnect the following cables from the system board (if still connected):
●
(1)
Modem cable
●
(2)
Audio board cable
●
(3)
Fan cable
3.
Remove the two silver captive Phillips PM1.5×9.0 screws on the expansion connector
(1)
.
4.
Remove the two black Phillips PM2.5×6.0 screws that secure the system board to the computer
(2)
.
5.
Lift the right side of the system board
(1)
until it rests at an angle
(2)
.
Component replacement procedures
81