Compaq Presario V3500 Compaq Presario V3500 Notebook PC - Maintenance and Serv - Page 68
from the top cover., Swing the rear edge of the keyboard
View all Compaq Presario V3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2. Remove the three Phillips PM2.5×7.0 screws that secure the keyboard to the computer. 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 5. Lift the rear edge of the keyboard (1) until it rests at an angle. 6. Release the keyboard (2) by sliding it back to disengage the tabs on the front edge of the keyboard from the top cover. 7. Swing the rear edge of the keyboard (3) up and forward until it rests on the palm rest. 60 Chapter 4 Removal and replacement procedures
2
.
Remove the three Phillips PM2.5×7.0 screws that secure the keyboard to the computer.
3
.
Turn the computer display-side up, with the front toward you.
4
.
Open the computer as far as possible.
5
.
Lift the rear edge of the keyboard
(1)
until it rests at an angle.
6
.
Release the keyboard
(2)
by sliding it back to disengage the tabs on the front edge of the keyboard
from the top cover.
7
.
Swing the rear edge of the keyboard
(3)
up and forward until it rests on the palm rest.
60
Chapter
4
Removal and replacement procedures