Compaq Presario V3500 Compaq Presario V3500 Notebook PC - Maintenance and Serv - Page 70
Switch cover, and the three black Phillips PM2.0×5.0 screws
View all Compaq Presario V3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Switch cover Description Switch cover (includes power button board and cable, LED board, and LED board cable For use in computer models with Intel processors or full-featured models with AMD processors For use in defeatured computer models with AMD processors Spare part number 451313-001 417078-001 Before removing the switch cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the keyboard (see Keyboard on page 59). Remove the switch cover: 1. Remove the two Phillips PM2.5×9.0 screws (1) and the three black Phillips PM2.0×5.0 screws (2) that secure the switch cover to the computer. 2. Turn the computer display-side up, with the front toward you. 3. Open the computer as far as possible. 4. Disconnect the power button board cable (1) from the system board. 62 Chapter 4 Removal and replacement procedures