Compaq Pro 6300 Hardware Reference Guide Elite 8300 Touch All-in-One Business - Page 22
Hardware Repair and Upgrade, Remove/disengage any security devices that prohibit opening the computer.
View all Compaq Pro 6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HP Compaq Elite 8300 Touch All-in-One Business PC HP Compaq Elite 8300 All-in-One Business PC HP Compaq Pro 6300 All-in-One Business PC Computer Dimensions (without stand) Height 387.1 mm 15.2 in 367.4 mm 14.5 in Width 561.9 mm 22.1 in 521.9 mm 20.5 in Depth 65.0 mm 2.6 in 65.0 mm 2.6 in Computer Weight (without stand) Minimum Configuration 7.65 kg (8300 Touch) 16.9 lb (8300 Touch) 6.60 kg (8300) 14.6 lb (8300) 6.63 kg 14.6 lb With Options 9.35 kg (8300 Touch) 20.6 lb (8300 Touch) 8.30 kg (8300) 18.3 lb (8300) 7.88 kg 17.4 lb VESA standard hole patterns height x width 100 mm x 100 mm 3.94 in x 3.94 in 100 mm x 100 mm 3.94 in x 3.94 in To remove the stand: 1. Remove all removable media, such as compact discs or USB flash drives, from the computer. 2. Turn off the computer properly through the operating system, then turn off any external devices. 3. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board. 4. Remove/disengage any security devices that prohibit opening the computer. 5. Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage. 16 Chapter 2 Hardware Repair and Upgrade