Compaq Pro 6300 Hardware Reference Guide Elite 8300 Touch All-in-One Business - Page 37
Inserting the Mounting Screws
![]() |
View all Compaq Pro 6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
9. Remove the four mounting screws from the hard disc drive. Be sure to keep the blue rubber grommets with each screw. Figure 2-30 Removing the Mounting Screws 10. Screw the four mounting screws into the new hard disc drive. Be sure to keep the blue rubber grommets behind each screw. Figure 2-31 Inserting the Mounting Screws NOTE: If you choose to install an optional 2.5-inch solid state drive (SSD) or self-encrypting drive (SED), you must 1. mount the drive in a drive adapter 2. screw the four mounting screws into the drive adapter Replacing Drives 31
![](/manual_guide/products/compaq-pro-6300-hardware-reference-guide-elite-8300-touch-allinone-business-pc-elite-8300-allinone-business-pc-pro-6300-allinone-business-pc-2b3356b/37.png)
9.
Remove the four mounting screws from the hard disc drive. Be sure to keep the blue rubber
grommets with each screw.
Figure 2-30
Removing the Mounting Screws
10.
Screw the four mounting screws into the new hard disc drive. Be sure to keep the blue rubber
grommets behind each screw.
Figure 2-31
Inserting the Mounting Screws
NOTE:
If you choose to install an optional 2.5-inch solid state drive (SSD) or self-encrypting
drive (SED), you must
1. mount the drive in a drive adapter
2. screw the four mounting screws into the drive adapter
Replacing Drives
31