Compaq ProLiant 2500 Compaq ProLiant Cluster HA/F100 and HA/F200 Administrator - Page 146
Table 6-8, Error Messages, Message, Description, Action
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Troubleshooting the Compaq ProLiant Clusters HA/F100 and HA/F200 6-21 Table 6-8 Error Messages continued Message Logical disk could not be reached in the following RA4000: . The lock could not be set. The loop has been locked by another application. Redundancy Manager is running in Read Only mode. There was an error attempting to shut down Windows NT. Please close all applications and shut down now. A version of the Compaq Fibre Channel Host Adapter SCSI Miniport Driver (cpqfcalm.sys) is being used that does not support redundancy. The minimum version for redundancy support is VX.X. The current version is VX.Z. Redundancy has been disabled. Description Redundancy Manager found an array with no drives in it. This could be caused by a damaged array or a bad connection. The array controller board is in an unknown state that caused a failed connection to the array controller. Another application has issued a lock management command to an array controller. The lock management command only allows viewing the data. An error occurred while shutting down Windows NT. This message informs you that the version of cpqfcalm.sys doesn't support redundancy. Action Check the array and all connections. No action needed to view the data. To configure the data, check the array controller and all physical connections. No action needed to view the data. To configure the data, close the other application to unlock the array controller. If the lock has expired, Redundancy Manager allows overriding the lock and taking control of the array controller. Close all applications and shut down the computer immediately. Make sure you have the correct version of cpqfcalm.sys.