Compaq ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 19
Caster Mounting Support
![]() |
View all Compaq ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2-6 Removal and Replacement Procedures Caster Mounting Support To remove the caster mounting support: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the casters. See "Locking Casters" earlier in this chapter. 3. Remove the four T-15 screws securing the caster mounting support to the server. 4. Pull the caster mounting support away from the server. Figure 2-2. Removing the caster mounting support Reverse steps 1 through 4 to replace the caster mounting support.
![](/manual_guide/products/compaq-proliant-3000-proliant-3000-servers-maintenance-service-guide-33b81bc/19.png)
2-6
Removal and Replacement Procedures
Caster Mounting Support
To remove the caster mounting support:
1.
Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2.
Remove the casters. See “Locking Casters” earlier in this chapter.
3.
Remove the four T-15 screws securing the caster mounting support to the server.
4.
Pull the caster mounting support away from the server.
Figure 2-2. Removing the caster mounting support
Reverse steps 1 through 4 to replace the caster mounting support.