Compaq ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 38
Removable Media Devices
![]() |
View all Compaq ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
2-25 Removable Media Devices The removable media area contains the standard CD-ROM drive and two available half-height drive bays. Removable Media Panel The removable media panel must be removed to access the removable media area. To remove the removable media panel: 1. Remove the four T-15 screws securing the removable media panel to the drive cage assembly. 2. Pull the removable media panel away from the drive cage assembly. Figure 2-21. Removing the removable media panel Reverse steps 1 and 2 to replace the removable media panel. NOTE: Ultra2 drive cage is shown. Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
![](/manual_guide/products/compaq-proliant-3000-proliant-3000-servers-maintenance-service-guide-33b81bc/38.png)
2-25
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
Removable Media Devices
The removable media area contains the standard CD-ROM drive and two available half-height
drive bays.
Removable Media Panel
The removable media panel must be removed to access the removable media area. To remove
the removable media panel:
1.
Remove the four T-15 screws securing the removable media panel to the drive
cage assembly.
2.
Pull the removable media panel away from the drive cage assembly.
Figure 2-21. Removing the removable media panel
Reverse steps 1 and 2 to replace the removable media panel.
NOTE
:
Ultra2 drive cage is shown.