Compaq ProLiant 5000 Migrating to the Compaq ProLiant 5000 Server in Microsoft - Page 4

480A/0197 WHITE PAPER (cont.) ... TABLE 1 MIGRATION CHECKLIST Description Requires Update Update Available Comments Windows NT Server 3.51 Optional Service Pack 1-4 Service Packs 1-4 are supported Windows NT SSD, Yes Windows NT SSD, version 1.18 Updated HAL and drivers required version 1.17 and earlier or later SMART Controller Optional SMART-2/P Controller The ProLiant 5000 Server is optimized for PCI Drive Array Controllers SMART-2/P Controller with Windows NT Yes SSD, version 1.17 Windows NT SSD, version 1.18 or later Updated driver required if upgrading from Windows NT SSD, version 1.17 or earlier Compaq SCSI-2 Hard Drives (Hot Pluggable) Optional Compaq SCSI-2 Fast-Wide Hard Use Compaq SCSI-2 Fast-Wide Hard Drives (Hot Pluggable) Drives for increased performance Compaq SIMM memory options Yes Compaq DIMM memory options SIMM memory options are not compatible NetFlex, NetFlex-2, and NetFlex-3/E Optional family of network controllers NetFlex-3/P and Netelligent PCI network controllers The ProLiant 5000 Server is optimized for PCI network controllers NetFlex-3/P network controller and Yes Windows NT SSD, version 1.17 Windows NT SSD, version 1.18 or greater Updated driver required ProLiant 1500, 2000, 4000 and 4500 Yes processor board options ProLiant 5000 Server processor board options ProLiant 5000 Server requires Pentium Pro processor board options Compaq Tape Drive options No N/A All Compaq tape drive options are supported The check list shown in Table 1 should not be considered complete - individual configurations can vary. Network servers based on multiprocessing operating systems like Windows NT Server 3.51 are extremely complex. The migration scenarios illustrated in this document should be used as examples only. Your configuration and results can vary. 4