Compaq ProLiant 6400R ProLiant Server Troubleshooting Guide - Page 225
Array Bypass Kit if a, Power Modules SPMs must
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
POST Error Messages Table C-12: 1600 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 1621-Error - Power Supply required with System Power Module None There are more SPMs than power supplies. 1621-Current SCSI bus cable configuration is not recommended 1622-Internal SCSI Jumper Board Not Installed. None None Improper SCSI bus cabling detected. SCSI jumper board missing or not functional. The system has detected that the array enabler board is not installed. 1623-System Battery is missing None 1624-System Power Module Failed 1625-Power Supply Failed 1626-Power Supply Reported Error Status None None None Battery is missing or has fallen out. System Power Module has failed. Power supply has failed. The power supply has returned an error status. Action Power supplies and System Power Modules (SPMs) must be installed in pairs and in line with each other. Be sure that an SPM is installed for each power supply. Check server-specific user documentation for proper SCSI bus cabling. 1. Install the array enabler board. 2. Install the Integrated Array Bypass Kit if a separate controller is used. Check for the installation of the battery located on the sideplane board. Replace specified System Power Module. Replace specified power supply. 1. Note the details of the error status and act accordingly. For example, if an over-temperature condition has occurred, check the system fans and ventilation. 2. If the problem persists, replace power supply. continued HP Servers Troubleshooting Guide C-45