Compaq ProLiant 800 HP ProLiant BL e-Class Integrated Administrator User Guide - Page 62
Console Log, Reboot, Power Off, Power Off Immediately, Refresh
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Web-Based User Interface • You can select the appropriate function in the Server Blade Power area using the following radio buttons: - Reboot reboots the server blade. - Power Off attempts a graceful shutdown of the server blade for 5 minutes, after which time this command powers down the server blade immediately. - Power Off Immediately powers off the server blade forcefully. CAUTION: Without the server blade health driver or an ACPI-compliant operating system, the Integrated Administrator cannot gracefully shut down a server blade. This condition can result in the permanent loss of critical data. IMPORTANT: You must click Apply for these settings to take effect. IMPORTANT: Whenever possible, HP recommends that you use the operating system shutdown procedures before powering down a server blade or enclosure. Once the enclosure is powered off, powering on can only occur with local access to the system. Console Log IMPORTANT: Only group members, group administrators, and enclosure administrators can view a console log of a server blade. The Console Log screen displays the console log for the specified bay. The console log of the bay is not stored between reboots of the Integrated Administrator, so the information will only include what has taken place since the last power on of the Integrated Administrator. The data captured in the console log is all output from the serial console of the server blade that occurred while no one was connected to the console. For security reasons, console output during a user connection session is not logged. The Refresh button refreshes the console log for the current server blade. HP ProLiant BL e-Class Integrated Administrator User Guide 3-31