Compaq ProLiant 800 HP ProLiant BL e-Class Integrated Administrator User Guide - Page 79
Accessing the Command Line Interface, Accessing Remotely through the Management Connector
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Command Line Interface Accessing the Command Line Interface You can access the CLI remotely through the management (10/100 Ethernet) connector or locally through the console (serial) connector on the rear panel of the enclosure. Accessing Remotely through the Management Connector To access the Integrated Administrator command line interface remotely through the management (10/100 Ethernet) connector: 1. Get the default host name from the settings tag attached to the interconnect tray. 2. Open a Telnet or Secure Shell application and enter the IP address or DNS name for the enclosure you wish to access. CAUTION: Using Telnet instead of Secure Shell means your remote session, including password, appears in clear text on that network. 3. Enter the user name and password into the Login prompt. Accessing Locally through the Console Connector To access the Integrated Administrator locally through the serial connector: 1. Connect a local client device, such as a laptop computer, to the serial connector using the null-modem cable that ships with the enclosure. IMPORTANT: Client devices must satisfy the requirements provided in the "Requirements for Local Client Devices" section in this chapter. 2. Open the terminal emulator and press the Enter key to get the login prompt. 3. Enter the user name and password. 4-2 HP ProLiant BL e-Class Integrated Administrator User Guide