Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 43

Removing the Large Access, Panel, Open the front bezel.

Get Compaq ProLiant 800 PDF manuals and user guides View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

3-6 Overview of Installing Hardware Options 7. Turn the small access panel over to locate the Expansion I/O Board Cage Labels. These labels provide instructions on installing expansion boards and setting system board switches. 8. Set the panel aside, and locate the expansion system board and expansion slots inside the chassis. Removing the Large Access Panel CAUTION: Do not operate the server with the large access panel removed. This panel is an integral part of the cooling system and removing it while the system is running may adversely affect data integrity. To remove the large access panel: 1. If the computer is on, turn it off and disconnect the power cord. 2. Disconnect any other external equipment connected to the computer. 3. Open the front bezel. 4. Loosen the two thumbscrews located on the left side of the front chassis. 5. Slide the large access panel toward the rear of the unit 0.5 inch (1.5 cm). 6. Lift and remove the panel.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
3-6
Overview of Installing Hardware Options
7.
Turn the small access panel over to locate the Expansion I/O Board
Cage Labels. These labels provide instructions on installing expansion
boards and setting system board switches.
8.
Set the panel aside, and locate the expansion system board and
expansion slots inside the chassis.
Removing the Large Access
Panel
CAUTION:
Do not operate the server with the large
access panel removed. This panel is an integral part of
the cooling system and removing it while the system is
running may adversely affect data integrity.
To remove the large access panel:
1.
If the computer is on, turn it off and disconnect the power cord.
2.
Disconnect any other external equipment connected to the computer.
3.
Open the front bezel.
4.
Loosen the two thumbscrews located on the left side of the front chassis.
5.
Slide the large access panel toward the rear of the unit 0.5 inch (1.5 cm).
6.
Lift and remove the panel.