Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 61
Installing a Second Processor
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3-24 Overview of Installing Hardware Options Installing a Second Processor (CPU) To install a second processor, refer to one of the following installation sources: s For a text and illustrated procedure, refer to the installation documentation that came with the option kit. s For a text overview of the procedure, refer to the procedure below. s For an illustrated overview of the procedure, refer to the Hardware Installation and Configuration poster included in the shipping box or to the Processor Cage Configuration Label located on the inside of the large access panel. To install a second processor: 1. If the server is on, turn it off and disconnect the power cord. 2. Disconnect any other external equipment connected to the computer. 3. Remove the processor cage, turn it over, and loosen the thumbscrew to open the cage. 4. Install the processor in the vacant Slot 1 socket and the processor power module in the PPM socket next to the Slot 1 socket. Close the latches. timber38.eps Figure 3-20. Installing the second processor