Compaq ProLiant 8500 Compaq Parallel Database Cluster Model PDC/O1000 for Orac - Page 166
Contact Your Compaq Support Representative
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Diagnosing and Resolving Shared Disk Problems A-7 4. Verify that the Gigabit Interface Converter-Shortwave (GBIA-SW) modules are all the correct brand or model type and are properly seated in the Fibre Host Adapters, Fibre Channel SAN Switches, Storage Hubs, or FA-AL Switches, and RA4000 Array Controllers. 5. Inspect all Fibre Channel cables to verify that they are in good condition and have no breaks or excessive bends. 6. Verify that the Fibre Channel cables are properly connected to the GBIA-SW modules in the Fibre Host Adapters, Fibre Channel SAN Switches, Storage Hubs, or FA-AL Switches, and RA4000 Array Controllers. For details on how to connect the GBIA-SW modules and the Fibre Channel cables, refer to the Compaq StorageWorks RAID Array 4000 User Guide or the Compaq StorageWorks RAID Array 4100 User Guide. 7. Verify that all Fibre Host Adapters, RA4000 Array Controllers, and RA4000/RA4100 Array shared disk modules are properly installed and seated in their receptacles. Contact Your Compaq Support Representative If you are unable to resolve the problem, contact your Compaq support representative for assistance. In North America, call the Compaq Technical Support Phone Center at 1-800-OK-COMPAQ. Outside North America, call the nearest Compaq Technical Support Phone Center. Telephone numbers for worldwide Technical Support Centers are listed on the Compaq website at www.compaq.com