Compaq ProLiant CL1850 Compaq ProLiant CL1850 Software User Guide - Page 29

Verifying Functionality of the Cluster, Verifying Direct and NetWare Links

Get Compaq ProLiant CL1850 PDF manuals and user guides View all Compaq ProLiant CL1850 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

System Setup and Configuration for Novell NetWare 2-7 Verifying Functionality of the Cluster Now that the software is installed, you can verify the creation of the cluster from the NHAS Console. All three links under Connection Status will show Connected. See Figure 2-1. Figure 2-1. NHAS: Connected Verifying Direct and NetWare Links To test Direct Link Disconnect: 1. Remove the network cable from the server's network card to which Direct Link is dedicated. The Direct Link status on the NHAS screen should change from Connected to Not Connected. 2. Reconnect the network cable to the network card. The Direct Link status should change from Not Connected to Connected.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
System Setup and Configuration for Novell NetWare
2-7
Verifying Functionality of the Cluster
Now that the software is installed, you can verify the creation of the cluster
from the NHAS Console. All three links under Connection Status will show
Connected. See Figure 2-1.
Figure 2-1.
NHAS: Connected
Verifying Direct and NetWare Links
To test Direct Link Disconnect:
1.
Remove the network cable from the server’s network card to which
Direct Link is dedicated. The Direct Link status on the NHAS screen
should change from Connected to Not Connected.
2.
Reconnect the network cable to the network card. The Direct Link status
should change from Not Connected to Connected.