Compaq ProLiant CL1850 Compaq ProLiant CL1850 Software User Guide - Page 58
Deleting Logical Drives, Using Configuration Files, Saving Configuration Settings to a File
![]() |
View all Compaq ProLiant CL1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
CR3500 Configuration Utility 3-27 Deleting Logical Drives CAUTION: If you delete a logical drive, all of your data on that logical drive will be lost. The logical drives in your storage subsystem are logical units that contain your user data. Although they do not exist in a physical sense, it is their logical structure that ties together the physical pieces of your data spread across their members. Use extreme caution when deleting a logical drive. 1. Click the logical drives that you want to delete. 2. From the Storage pull-down menu, select Logical Drive, then select Delete. A system message appears, asking if you want to delete all disks in the group. 3. Click Yes to delete all the disks in the group. Using Configuration Files You can use a configuration file to save the configuration settings of the CR3500 RAID Controllers and disk drives and view or reconstruct the settings at a later time. You also can revert to one of these saved configurations at any time. The CR3500 Configuration Utility reads the configuration file you choose and sets up your subsystem accordingly. Saving Configuration Settings to a File From the Storage pull-down menu, select Controller, then select Configuration, then select Save. The current configuration settings, including caches, LUNs, host ports, and strip size will be saved. CAUTION: When saving a configuration, all controller data and RAID set data is preserved at the time of the Save operation. When restoring a configuration, the configuration being restored must match EXACTLY the configuration when it was saved. Any RAID sets in existence when the Restore Configuration operation takes place that were not in existence when the configuration was saved will be reinitialized, and any data on those RAID sets will be lost. Make sure you have a recent backup copy of your configuration data before you execute this operation. Restoring Configuration Settings from a File You can automatically restore or configure your entire storage subsystem from a previously saved configuration file. The CR3500 Configuration Utility can configure your subsystem from a file only if the file corresponds to your subsystem's hardware configuration.
![](/manual_guide/products/compaq-124708001-compaq-proliant-cl1850-software-user-guide-c1e9bc1/58.png)