Compaq dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide - Page 197
Front Bezel, that keeps
View all Compaq dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis 8.7 Front Bezel 1. Prepare the computer for disassembly (Section 8.1). 2. Remove the computer access panel (Section 8.3). 3. Remove any MultiBay device in the drive cage (Section 8.4). 4. Remove the MultiBay riser card (Section 8.5). 5. Remove the front panel assembly (Section 8.6). 6. Use a #0 Phillips screwdriver to remove the four screws that secure the front bezel to the front panel assembly 1. 7. Raise the plastic locking device 2 located just below the MultiBay drive cage and pull the front bezel away from the assembly. It may be necessary to release the catch 3 that keeps the top of the bezel in place. To reinstall the front bezel, reverse the removal procedures. ✎ When installing the front bezel, make sure that the MultiBay eject lever is positioned nearest the center of the bezel to ensure it will properly activate the eject mechanism. Service Reference Guide, dc7100 361288-003 8-9