Compaq dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide - Page 21
Heading, Option, Description, Data Execution Prevention Mode help prevent OS security breaches.
View all Compaq dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setup Utilities and Diagnostics Features Heading Security (continued) Option Embedded Security Device Security Network Service Boot System IDs Description Allows you to: • Enable/disable the Embedded Security device. • Reset the device to Factory Settings. This feature is supported on select models only. See the Desktop Management Guide on the Documentation CD for more information. Enables/disables serial ports, parallel port, front USB ports, system audio, network controllers (some models), MultiBay devices (some models), SMBus controller (some models), and SCSI controllers (some models). Enables/disables the computer's ability to boot from an operating system installed on a network server. (Feature available on NIC models only; the network controller must reside on the PCI bus or be embedded on the system board.) Allows you to set: • Asset tag (18-byte identifier) and ownership Tag (80-byte identifier displayed during POST). See the Desktop Management Guide on the Documentation CD for more information. • Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.) • Keyboard locale setting (for example, English or German) for System ID entry. DriveLock Security Allows you to assign or modify a master or user password for MultiBay hard drives. When this feature is enabled, the user is prompted to provide one of the DriveLock passwords during POST. If neither is successfully entered, the hard drive will remain inaccessible until one of the passwords is successfully provided during a subsequent cold-boot sequence. ✎ This selection will only appear when at least one MultiBay drive that supports the DriveLock feature is attached to the system. See the Desktop Management Guide on the Documentation CD for more information. Data Execution Prevention Enable/Disable. Data Execution Prevention Mode help prevent OS security breaches. ✎ This selection is in effect only if the processor and operating system being used comprehend and utilize the function. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. Service Reference Guide, dc7100 361288-003 2-9