Compaq dx2250 HP Compaq dx2250 Business PC, Service Reference Guide, 1st Editi - Page 66
Access Panel - mt
View all Compaq dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Access Panel 1. Prepare the computer for disassembly (Preparation for Disassembly on page 59). CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 2. Disconnect the power cord from the computer and from the power source (1). 3. Remove the two screws that secure the access panel to the computer chassis (2). 4. Slide the access panel back about 6 mm (1/4 inch), then rotate the top of the panel away from the chassis (pivot on the bottom) and lift it off the unit (3). To replace the access panel, reverse the removal steps. 60 Chapter 7 Removal and Replacement Procedures- Microtower (MT) Chassis ENWW
Access Panel
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
59
).
CAUTION:
Before removing the computer access panel, ensure that the computer is
turned off and that the power cord is disconnected from the electrical outlet.
2.
Disconnect the power cord from the computer and from the power source (1).
3.
Remove the two screws that secure the access panel to the computer chassis (2).
4.
Slide the access panel back about 6 mm (1/4 inch), then rotate the top of the panel away from the
chassis (pivot on the bottom) and lift it off the unit (3).
To replace the access panel, reverse the removal steps.
60
Chapter 7
Removal and Replacement Procedures— Microtower (MT) Chassis
ENWW