Compaq dx2250 HP Compaq dx2250 Business PC, Service Reference Guide, 1st Editi - Page 85
System Fan, To install the fan, reverse the removal procedures.
View all Compaq dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
System Fan 1. Prepare the computer for disassembly (Preparation for Disassembly on page 59) 2. Remove the access panel (Access Panel on page 60) 3. Disconnect the cable that connects the system fan to the system board. 4. Remove the screws that secure the fan to the chassis and remove the fan. To install the fan, reverse the removal procedures. NOTE: When installing the fan, make sure the wires leading from the fan are located near the P2 4-pin power connector on the system board. ENWW System Fan 79
System Fan
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
59
)
2.
Remove the access panel (
Access Panel
on page
60
)
3.
Disconnect the cable that connects the system fan to the system board.
4.
Remove the screws that secure the fan to the chassis and remove the fan.
To install the fan, reverse the removal procedures.
NOTE:
When installing the fan, make sure the wires leading from the fan are located near the
P2 4–pin power connector on the system board.
ENWW
System Fan
79