Compaq dx2250 HP Compaq dx2250 Business PC, Service Reference Guide, 1st Editi - Page 83
Power Switch Assembly, Free the braided cables from the cable tie that is attached to the chassis.
![]() |
View all Compaq dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Power Switch Assembly 1. Prepare the computer for disassembly (Preparation for Disassembly on page 59). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Access Panel on page 60) 3. Disconnect the braided cables from the system board. 4. Free the braided cables from the cable tie that is attached to the chassis. 5. Squeeze the top of the switch holder (1), rotate the switch, and remove it from the chassis. To install the power switch assembly, reverse the removal procedures. ENWW Power Switch Assembly 77
![](/manual_guide/products/compaq-dx2250-hp-compaq-dx2250-business-pc-service-reference-guide-1st-edition-edbd3fd/83.png)
Power Switch Assembly
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
59
).
2.
Remove the access panel and rotate the computer so the system board is parallel to the table to
make it easier to work on (
Access Panel
on page
60
)
3.
Disconnect the braided cables from the system board.
4.
Free the braided cables from the cable tie that is attached to the chassis.
5.
Squeeze the top of the switch holder (1), rotate the switch, and remove it from the chassis.
To install the power switch assembly, reverse the removal procedures.
ENWW
Power Switch Assembly
77