Craftsman 11779 Operation Manual - Page 12

A WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. A WARNING: Always wear safety goggles or safety glasses with side shields when using compressed air to clean products. If the operation is dusty, also wear a dust mask. A WARNING: To avoid serious personal injury, always remove the battery pack from the product when cleaning or performing any maintenance. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. ,,_IL WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a Sears Service Center. BATTERY PACK REMOVAL FOR RECYCLING See Figures 9 - 10. TO REMOVE: AND PREPARATION • Insert a flat blade screwdriver between the edge of the rotation button and the screwdriver body. • Remove rotation button. • Remove the five screws securing motor housing cover then remove cover. • Lift batteries from motor housing enough to expose leads and battery terminals. Disconnect leads from battery terminals. NOTE: Be careful not to break battery leads when disconnecting them. To preserve natural resources, please recycle or dispose of batteries properly. This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickelcadmium batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. A WARNING: Upon removal, cover the battery pack's terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury. BATTERIES The screwdriver is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this tool have been designed to provide maximum trouble free life. However, like all batteries, they will eventually wear out. To remove and dispose batteries, follow BATTERY REMOVAL instructions. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn. SCREWS...... ? ? ? SCREWDRIVER ROTATION BUTTON COVE__ BATTERIES Fig. 10 12