Craftsman 17925 Owners Manual - Page 9

Hanging Vac on Storage Rack 1. Set the vac on the floor near the stor- age rack. Measure the distance from center of storage rack to the closest electrical outlet and add 18 inches. Storage Rack Retan, Opening in Storage Rack Release Tab _1 DOutlet_ istance __ Inches 2, Uncoil that amount of power cord from the cord wrap. Drape the loose cord over the top of the vacuum and down the front. 3. Grasp the handle with one hand and the bottom of the vsc canister at the front foot with the other hand. Always lift the vac with both hands. Lift the vac up to the storage rack. 4. Align the upper hook on the vac with the rectangular opening in the storage rack. Push the vac against the storage rack. _Rectangular _1 /Opening Mac Hook Push Vac Against Storage Rack Vac Canister 5. Lower the vsc until the upper vsc hook and lower hook are engaged and the bottom of the vac canister rests on the rack. The release tab will pop out over top of vac. _ Release Tab Upper HI Lower I II Vac Hook_ 6. Snap the power cord into the cord retainers in the front surface of the rack and loop around the keeper behind the wand storage area. The cord may exit on either the left or right side. Plug the power cord into the electrical outlet. Do __ Upper Hook not fasten power cord to wall in any way,