Craftsman 28928 Operation Manual - Page 21

To Remove, Mower, Install

Get Craftsman 28928 - YT 4000 24hp 46inch Yard Tractor PDF manuals and user guides View all Craftsman 28928 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

WVIACRENIONGR: ADJTUOSTAMVEONIDTS: SERIOUS INJURY, BEFORE PERFORMING ANY SER= 1. Depress brake pedal fully and set parking brake. 2. Place attachment clutch in "DISENGAGED" position. 3. Turn ignition key to "STOP" and remove key. 4. Make sure the blades and all moving parts have completely stopped. 5. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO REMOVE MOWER 1. Place attachment clutch in "DISEN- GAGED" position. 2. Lower attachment lift lever to its lowest position. 3. Roll belt off engine pulley (M) and belt keepers (G). 4. Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket. 5. Remove clutch cable spring (Q) from idler arm (R). 6. Disconnect front link (E) from mower remove retainer spring and washer. 7. Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. Al_ CAUTION: After rear lift links are discon- nected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever. 8. Slide mower out from under right side of tractor. IMPORTANT: If an attachment other than the mower is to be mounted on the tractor, remove the front link (E) and rear lift liks (C) from tractor and hook the clutch spring (Q) into the cable guide on front edge of lower dash. TO INSTALL MOWER Be sure tractor is on level surface and engage parking brake. 1. Lower attachment lift lever to its lowest position. CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position. NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. 2. Slide mower under tractor until it is cen- tered under tractor. 03042tex 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
WARNING:
TO
AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SER=
VICE
OR
ADJUSTMENTS:
1.
Depress
brake
pedal
fully
and
set
parking
brake.
2.
Place
attachment
clutch
in "DISENGAGED"
position.
3.
Turn
ignition
key to
"STOP"
and
remove
key.
4.
Make
sure
the
blades
and
all moving
parts
have
completely
stopped.
5.
Disconnect
spark
plug
wire
from
spark
plug
and
place
wire
where
it cannot
come
in contact
with
plug.
TO REMOVE
MOWER
1.
Place
attachment
clutch
in
"DISEN-
GAGED"
position.
2.
Lower
attachment
lift lever
to
its lowest
position.
3.
Roll
belt
off
engine
pulley
(M)
and
belt
keepers
(G).
4.
Remove
retainer
spring
(K),
slide
collar
(L)
off
and
push
housing
guide
(P)
out
of bracket.
5.
Remove
clutch
cable
spring
(Q)
from
idler
arm
(R).
6.
Disconnect
front
link
(E)
from
mower
-
remove
retainer
spring
and
washer.
7.
Go
to either
side
of mower
and
discon-
nect
mower
suspension
arm
(A)
from
chassis
pin
(B) and
rear
lift link
(C) from
rear
mower
bracket
(D) - remove
retainer
springs
and
washers.
Al_
CAUTION:
After
rear
lift links are discon-
nected,
the attachment
lift lever
will be spring
loaded.
Have
a tight
grip
on lift lever
when
changing
position
of the
lever.
8.
Slide
mower
out from
under
right
side
of
tractor.
IMPORTANT:
If an
attachment
other
than
the
mower
is to
be
mounted
on the
tractor,
remove
the
front
link
(E)
and
rear
lift
liks
(C) from
tractor
and
hook
the
clutch
spring
(Q)
into
the
cable
guide
on
front
edge
of
lower
dash.
TO
INSTALL
MOWER
Be sure tractor
is on level
surface
and engage
parking
brake.
1.
Lower
attachment
lift lever
to its
lowest
position.
CAUTION:
Lift
lever
is
spring
loaded.
Have
a tight
grip
on lift lever,
lower
it slowly
and
engage
in lowest
position.
NOTE:
Be
sure
mower
side
suspension
arms
(A) are pointing
forward
before
sliding
mower
under
tractor.
2.
Slide
mower
under
tractor
until
it is cen-
tered
under
tractor.
03042tex
21