Craftsman 3800 Operation Manual - Page 22
Ch3nge Engine, Cylinder Bore, Protect Pump, Other Storage Tips
View all Craftsman 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Ch3nge Engine Oil While engine is still warm, drain oil from crankcase. Refill with recommended grade. See Changing Engine Off. Oil Cylinder Bore * Removespark plug. Squirt about 1 tablespoon of clean engine oil into the cylinder. Cover spark plug hole with rag. Pull recoil handle slowly to distribute oil. Avoid spray from spark plug hole. * installspark plug. DO NOTconnect spark plug wire. Protect Pump To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver, Mode] 6039, to treat pump. This prevents freeze damage and lubricates pistons and seals. ty NOTICE ou must protect your unit from freezing temperatures. Failureto do so will permanentlydamageyour pumpand renderyour unit inoperable. Freezedamageis not coveredunderwarranty. NOTE:PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact your local Searsservice center to purchase PumpSaver. To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Readand follow all instructions and warnings given on the PumpSavercontainer. Other Storage Tips 1. DO NOTstore fuel from one season to another unless it has been treated as described in Protect Fuel System. 2. Replacefuel container if it starts to rust. Rust and/or dirt in fuel can cause problems if it's used with this unit. Cover unit with a suitable protective cover that does not retain moisture. WARHJHG _ Storagecovers can be flammable. * DONOTplacea storagecoverovera hot pressurewasher. * Letequipmentcoolfor a sufficienttime beforeplacingthe coveron the equipment. 4. Store unit in a clean and dry area. 22