Cub Cadet RT 65 H Garden Tiller Operation Manual - Page 11

Controls & Features 4 Gear Selection Handle Handle Adjustment Lock Clutch Control Shift Lever Indicator Depth Stake NOTE: This Operator's Manual covers several models. Garden tiller features may vary by model. Not all features in this manual are applicable to all garden tiller models and the garden tiller depicted may differ from yours. Engine Controls See the separate Engine Operator's Manual for information and functions of the engine controls. Gear Selection Handle The gear selection handle is located in the center of the handle on the tiller. It is used F R to select NEUTRAL, REVERSE, N TINE S FORWARD CULTIVATING TINES REVERSE GROUND BREAKING WHEELS FORWARD E U or one of the FORWARD modes on the shift lever TILLING SOFT SOIL TILLING HARD SOIL (NO TINE ACTION) T FORWARD R A i23106 WHEEL DRIVE L R E V E R S E indicator. See the Operation section for more information. Clutch Control The clutch control is located beneath the handle. Squeezing the clutch control against the handle engages the wheel and tine drive mechanisms. Handle Adjustment Lock The handle may be adjusted to the height desired. Loosen the handle height adjustment lock a few turns. Pivot handle up or down to desired position and tighten the lock. Depth Stake The depth stake controls the tilling depth. Refer to the Operation section. Side Shield The side shields are located on the right and left sides of the tine shield and can be used with the depth adjustment lever to control tilling depth. 11