Cub Cadet TANK L 60 KH TANK L 60 KH Operator's Manual - Page 15
Seat Adjustment
View all Cub Cadet TANK L 60 KH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4. Insert the wiring harness into the bottom of the seat as shown in Figure 3-12. To adjust the arm rest, lift the arm rest and rotate the block adjustment into one of the four positions (0-3, 0 being the lowest and 3 being the highest.) and lower the arm rest. See Figure 3-14. Figure 3-12 NOTE: When the harness is connected, be sure to push the excess wire from the wire harness into the seat box hole before continuing. Seat Adjustment This tractor is equipped with an adjustable seat, which includes a retractable seat belt assembly and an Operator Presence Sensor (OPS). The OPS in the form of a switch, is integrated into the seat bottom and is connected to the machine electrical system. The seat can be adjusted forward and back and the arm rest can be adjusted up and down. To move the seat forward or back, locate the seat adjustment rod under the seat. Push the rod to the left and slide the seat forward or back into the desired position and release the rod when the seat is in the desired position. See Figure 3-13. Figure 3-14 The mechanical suspension mechanism (if equipped) incorporates weight/ride adjustment controls for operators in the 125 to 275 lb. weight range (turn the knob on the front of the seat clockwise to increase the weight capacity and counterclockwise to decrease. See Figure 3-15. Figure 3-13 Figure 3-15 NOTE: The seat base must be secured by the latch, otherwise, the seat assembly could tilt forward. The Operator Presence Sensor must be connected to the electrical wiring harness. Section 2 - Assembly & Set-Up 15