Cuisinart FP-14 FP-14DC Manual - Page 3

IMPORTANT UNPACKING INSTRUCTIONS This package contains a Cuisinart Elite Collection™ 14-Cup Food Processor and the accessories for it: 14-, 11- and 4.5-cup work bowls, work bowl cover, metal chopping/mixing blade, dough blade, adjustable slicing disc, reversible shedding disc, stem adapter, large and small pushers, spatula, accessory storage case, instruction/recipe book and How-to DVD. CAUTION: THE CUTTING TOOLS HAVE VERY SHARP EDGES. To avoid injury when unpacking the parts, please follow these instructions. 1. Place the box on a low table or on the floor next to the kitchen counter where you intend to keep the food processor. Be sure the box is right side up. 2. Open top flaps-there will be a rectangular block of foam that holds the processor parts, each fitted into a cavity in the foam. 3. Remove the instruction/recipe book, the spatula (A) is on one side of the foam block. 4. Remove the bowl cover (B) from the other side of the foam block. Lift out the large and small pushers with cover (C) from their space under the bowl cover in the foam block. 5. Lift out the DVD from its space in the foam block. 6. Lift out the foam block and the cardboard frame. 7. The housing base with 14-, 11- and 4.5-cup work bowls are on one side of the bottom of the box. 8. Remove the base and bowls together by grasping the handle and lifting straight up. Do not rotate the bowl clockwise on the base. This will cause the bowl to separate from the base. 9. Place the food processor on the counter or table. Read the instructions thoroughly before using the machine. 10. The storage case is on the other side of the bottom of the box. 11. Lift out the storage case, unlock the cover and remove the foam block; small metal chopping/mixing blade (D), dough blade (E), large metal chopping/mixing blade (F), and stem adapter (G), are each in a cavity. CAREFULLY REMOVE THE METAL CHOPPING/MIXING BLADE BY GRASPING THE CENTER WHITE HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES, AS THEY ARE RAZOR SHARP. 12. Pull out the drawer to the storage case with the adjustable slicing disc (H), and CAREFULLY REMOVE IT BY USING THE FINGER HOLES. DO NOT TOUCH THE BLADE, IT IS VERY SHARP. The reversible shredding disc (I) is also in the drawer. Carefully remove the slicing disc by using the finger holes and carefully remove the shredding disc by using the plastic hub. Remember to lock the parts in the storage case when not in use. 13. Save the shipping cartons and plastic foam blocks. You will find them very useful if you need to repack the processor for moving or other shipment. Please watch the enclosed How-to DVD before using the food processor. NOTE: Remember to return your completed product registration card with all information carefully filled out. Storage Cover with Lock Drawer 3