Cuisinart FR-10 Owner Manual - Page 6

CLEANING AND MAINTENANCE Always make sure the appliance is unplugged before you start cleaning it. 1. Clean the exterior of the unit with a soft, moist cloth. If heavily soiled, a mild detergent can be used. 2. Remove the whisk or stirrer from tank and rinse them with soap under warm running water. Seal on cover can also be removed and rinsed under warm, soapy water. 3. Clean out the tank with hot water and a soft cloth after use. If the tank is still soiled, wash using a soap solution and rinse thoroughly. Use a soft cloth to prevent damaging the nonstick coating. CAUTION: Never submerge the base, the power cord or plugs in water or other liquids. 4. Any service other than cleaning and normal user maintenance should be performed by an authorized Cuisinart Service Representative. TROUBLESHOOTING Q: Why are LED lights not illuminating after I push the corresponding button? A: The plug is not plugged in. Make sure plug is placed correctly in the socket. A: Temperature monitoring has been triggered. Let the unit cool for 5 minutes. A: Filling level was too high. Reduce the amount of milk in the tank. Q: Why is milk leaking from around the cover? A: The seal ring is missing or dirty. Clean the seal ring and replace. A: The cover is not placed correctly over the milk tank. Put the cover on so that it is flush with the tank and the seal is not showing. Q: Why is the milk froth not coming out the way I want? A: The wrong attachment may be in place in the milk tank. Double check and make sure the milk frothing whisk is inserted in the tank correctly. 6