Cuisinart SS-10 Owner Manual - Page 11
Hot Water/Rinse
View all Cuisinart SS-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Hot Water/Rinse Your coffeemaker is equipped to dispense hot water to make hot chocolate, tea, soup, and more. Your coffeemaker is also equipped with a Rinse cycle to flush out residual flavors. The Rinse cycle will dispense about 4 oz. of hot water. Note: We suggest running the Rinse cycle before using hot water to flush out any residual coffee, tea or hot cocoa flavor. To Rinse: 1. Place a cup or mug on the drip tray. 2. Lift the handle. Check to make sure there is no capsule inserted. 3. Lower the handle to close the brewing chamber. When closed completely, the control panel will indicated READY. 4. Press Rinse. During the Rinse cycle, only the Rinse button will be lit. The control panel will display the word RINSE (see figure 9). To make Hot Water: 1. Place a cup or mug on the drip tray. 2. Lift the handle. Check to make sure there is no capsule inserted. 3. Lower the handle to close the brewing chamber. When closed completely, the control panel will indicated READY. 4. All brew-size icons will be displayed with your default size shown as a solid mug. To choose a different size, use the or buttons. 5. Press Hot Water. While the Hot Water cycle is in progress, only the Hot Water button will be lit. The control panel will display the words HOT WATER, as well as the serving size you selected (see figure 10). figure 9 The RINSE and HOT WATER buttons will remain lit for one minute. While buttons are lit, you can perform another Rinse cycle or dispense Hot Water without opening the brew chamber. All brewsize icons will be displayed. Note: To BREW directly after a Rinse cycle, open the brewing head, insert a capsule and brew as normal. figure 10 Following the cycle, you can perform another Rinse or another Hot Water cycle immediately for up to one minute. The RINSE, HOT WATER, MENU and and buttons will be lit. After this time the unit will return to Idle mode and OPEN HEAD will be displayed. Note: To BREW directly after a Hot Water cycle, open the brewing head, insert a capsule and brew as normal. 11