CyberPower CP1350AVRLCD User Manual - Page 5

BASIC OPERATION - continued 12. Coax/Cable/DSS Surge Protection The Coax/Cable/DSS protection ports will protect any cable modem, CATV converter, or DSS receiver. 13. Widely-spaced Outlets The unit has two outlets spaced to allow AC power adapter blocks to be plugged into the UPS without blocking adjacent outlets. REPLACING THE BATTERY Replacement of batteries located in an OPERATOR ACCESS AREA 1. When replacing batteries, replace with the same number of the following battery: CyberPower / RB1290 for the CP850/1000AVRLCD; CyberPower / RB1290X2 for the CP1350/1500AVRLCD 2. CAUTION! Risk of Energy Hazard, 12 V, maximum 9 Ampere-hour battery for CP850/1000AVRLCD; 24 V, maximum 9 Ampere-hour battery for CP1350/1500AVRLCD. Before replacing batteries, remove conductive jewelry such as chains, wrist watches, and rings. High energy conducted through these materials could cause severe burns. 3. CAUTION! Do not dispose of batteries in a fire. The batteries may explode 4. CAUTION! Do not open or mutilate batteries. Released material is harmful to the skin and eyes. It may be toxic. 5. CAUTION: A battery can present a risk of electrical shock and high short circuit current. The following precautions should be observed when working on batteries: 1) Remove watches rings, or other metal objects. 2) Use tools with insulated handles. CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATIONS BATTERY REPLACEMENT PROCEDURE: CP850/1000/1500AVRLCD 1. Turn off and unplug all connected equipment. 2. Turn the UPS off and unplug it from the AC power source. 3. Turn the UPS on its side. 4. Remove the front panel retaining screws located on the bottom of the UPS. 5. Slide the battery compartment cover (front panel) completely off of the unit. CP850/1000AVRLCD CP1500AVRLCD