D-Link COVR-2202 User Manual - Page 22
Dynamic IP DHCP, Advanced Settings
View all D-Link COVR-2202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Section 3 - Configuration Dynamic IP (DHCP) Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use. Advanced Settings Host Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Enter the primary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address The default MAC address is set to the physical interface MAC address Clone: of port 1 on Covr Point A.You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-2202 || COVR-2200 User Manual 18