D-Link COVR-X1862 Product Manual 2 - Page 25
Advanced Settings, Static IP
View all D-Link COVR-X1862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Section 3 - Configuration Static IP Select Static IP if your IP information is provided by your Internet Service Provider (ISP). IP Address: Enter the IP address provided by your ISP. Subnet Mask: Enter the subnet mask provided by your ISP. Default Gateway: Enter the default gateway address provided by your ISP. Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Advanced Settings Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address The default MAC address is set to the physical interface MAC address Clone: of port 1 on Covr Point A.You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. COVR-X1860 HW:A1 FW:1.00 D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual 21