D-Link COVR-X1862 Product Manual 2 - Page 58
Port Forwarding, Add Rule
View all D-Link COVR-X1862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Section 3 - Configuration Port Forwarding Port Forwarding Port forwarding allows you to specify a port or range of ports to forward to specific devices on the network. This might be necessary for certain applications to connect through Covr Point A. In the Features menu on the bar on the top of the page, click Port Forwarding. COVR-X1860 HW:A1 FW:1.00 If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear: Name: Enter a name for the rule. Local IP: Enter the IP address of the device on your local network to which the port will be forwarded. Alternatively, select the device from the drop-down menu. TCP Port: Enter the TCP ports that you want to forward. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000). UDP Port: Enter the UDP ports that you want to forward. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000). Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 62 for more information. Click Apply when you are done. D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual 54