D-Link DAP-1320 Quick Installation Guide - Page 8
Troubleshooting - factory reset
View all D-Link DAP-1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ENGLISH TROUBLESHOOTING SETUP AND CONFIGURATION PROBLEMS 1. HOW DO I RESET MY DAP-1320 WIRELESS RANGE EXTENDER N300 TO FACTORY DEFAULT SETTINGS? - Ensure the product is powered on. - Using a paperclip, press and hold the reset button on the bottom of the device for 5 seconds. Note: Resetting the product to the factory default will erase the current configuration settings. The default Wi-Fi network name (SSID) and password are printed on the DAP-1320's Wi-Fi Configuration Card. 2. HOW DO I CONNECT A PC OR OTHER DEVICE TO THE DAP-1320 IF I HAVE FORGOTTEN MY WI-FI NETWORK NAME (SSID) OR WI-FI PASSWORD? - If you haven't changed the extended Wi-Fi network's settings, you can use the network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card. - If you did change the network name (SSID) or Wi-Fi password and you did not record this information on the Wi-Fi Configuration Card or somewhere else, you must reset the device as described in Question 1 above. - It is recomended that you make a record of this information so that you can easily connect additional wireless devices in the future. You can use the included Wi-Fi Configuration Card to record this important information for future use. 6 DAP-1320