D-Link DAP-1555 User Manual - Page 67
Configure WPA-Enterprise RADIUS In AP Mode
![]() |
UPC - 790069305146
View all D-Link DAP-1555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Section 4 - Security Configure WPA-Enterprise (RADIUS) In AP Mode It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption.Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on Setup and then click Wireless Settings on the left side. 2. Next to Security Mode, select WPA-Enterprise. 3. Next to WPA Mode, select Auto WPA or WPA2, WPA2 Only, or WPA Only. Use Auto if you have wireless clients using both WPA and WPA2. 4. Next to Cipher Type, select TKIP, AES or TKIP and AES 5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default). 6. Next to Authentication Timeout, enter the amount of time before a client is required to re-authenticate (60 minutes is default). 7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. 8. Next to RADIUS Server Port, enter the port you are using with D-Link DAP-1555 User Manual 67
![](/manual_guide/products/dlink-dap1555-user-manual-1c6fb79/67.png)