D-Link DAP-1555 User Manual - Page 71
Configure WPA-Enterprise RADIUS In Bridge Mode
![]() |
UPC - 790069305146
View all D-Link DAP-1555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Section 4 - Security Configure WPA-Enterprise (RADIUS) In Bridge Mode It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption.Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the bridge (192.168.0.35). Click on Setup and then click Wireless Settings on the left side. 2. Next to Security Mode, select WPA-Enterprise. 3. Next to WPA Mode, select Auto WPA or WPA2, WPA2 Only, or WPA Only. Use Auto if you have wireless clients using both WPA and WPA2. 4. Next to Cipher Type, select TKIP, AES or TKIP and AES. 5. Next to EAP type, select EAP-TLS, EAP-TTLS, or PEAP that will be used for authentication. 6. Next to EAP Username, enter the username of the wireless client for the tunnel establishment and the inner authentication method. 7. Next to EAP Password, enter the password of the wireless client for EAP-MD5 or the inner authentication methods of PEAP and EAP-TTLS. 8. Next to EAP Certificate Password, enter the password of the user certificate. D-Link DAP-1555 User Manual 71
![](/manual_guide/products/dlink-dap1555-user-manual-1c6fb79/71.png)