D-Link DAP-2590 Product Manual - Page 15

Section 3 - Configuration Home > Basic Settings > Wireless Access Point mode In Access Point mode, the DAP-2590 functions as a wireless AP. After completing the desired settings, click the Save button to let your changes take effect. Wireless Band: Select either 2.4 GHz or 5 GHz from the pull-down menu. Mode: Select Access Point from the pull-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can easily be changed to connect to an existing wireless network or to establish a new wireless network. The SSID can be up to 32 characters and is case-sensitive. SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Enabling this feature automatically selects the channel that provides the best wireless performance. Enable is set Selection: by default. The channel selection process only occurs when the AP is booting up. Channel: All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel Selection setting to Disable, and then use the pull-down menu to make the desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.) D-Link DAP-2590 User Manual 15