D-Link DAP-2662 Product Manual - Page 13
Channel, Channel Width, Authentication, 11k/v/r, Disable, Open System, Shared Key, WPA-Personal
View all D-Link DAP-2662 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Web User Interface Channel: To change the channel, first toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings. Channel Width: Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on your network. Authentication: Use the drop-down menu to choose Open System, Shared Key, WPA-Personal, WPA-Enterprise, or 802.1x. • Select Open System to communicate the key across the network (WEP). • Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. • Select WPA-Personal to secure your network using a password and dynamic key. No RADIUS server is required. • Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. • Select 802.1X if your network is using port-based Network Access Control. Note: The default Open System authentication allows wireless connection without requiring user authentication. It is highly recommended that you encrypt your network using one of the security methods other than the default setting. 802.11k/v/r: Use the drop-down menu to choose to enable or disable 802.11k/v/r 13