D-Link DAP-2662 Product Manual - Page 7
Hardware Overview, LEDs, Connections
View all D-Link DAP-2662 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Hardware Overview Hardware Overview LEDs Connections Solid Red Indicates the access point has malfunctioned. 1 Power/Status Blinking Red This LED will blink during boot-up. Solid Green Indicates that the DAP-2662 is working properly. 2 Power Receptor Connect the supplied power adapter. 3 LAN (PoE) Port Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable. Press and hold for five seconds to reset the access point 4 Reset Button to the factory default settings. Press and hold for one second to reboot the access point. 7
Hardware Overview
7
Hardware Overview
LEDs
Connections
2
Power Receptor
Connect the supplied power adapter.
3
LAN (PoE) Port
Connect to a Power over Ethernet (PoE) switch or router
via an Ethernet cable.
4
Reset Button
Press and hold for five seconds to reset the access point
to the factory default settings. Press and hold for one
second to reboot the access point.
1
Power/Status
Solid Red
Indicates the access point has malfunctioned.
Blinking Red
This LED will blink during boot-up.
Solid Green
Indicates that the DAP-2662 is working
properly.