D-Link DAP-3662 User Manual - Page 13
Connect to your Network - default ip
View all D-Link DAP-3662 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Section 2 - Installation Connect to your Network 1. Connect an external Power-over-Ethernet (PoE) switch to the LAN1 (PoE) port to power on access point. 2. Connect PC to the switch and you can configure access point through web UI. 3. Open a web browser and go to https://IP address (default is https://192.168.0.50). Enter admin as your username and leave the password blank to log into the web UI. Now you can configure the AP via web UI. D-Link DAP-3662 User Manual 13
13
D-Link DAP-3662 User Manual
Section 2 - Installation
Connect to your Network
1.
Connect an external Power-over-Ethernet (PoE) switch to the LAN1 (PoE) port to power on access point.
2.
Connect PC to the switch and you can configure access point through web UI.
3.
Open a web browser and go to https://IP address (default is https://192.168.0.50). Enter admin as your username and leave the password blank to
log into the web UI. Now you can configure the AP via web UI.