D-Link DAP-3662 User Manual - Page 27

LAN, Static IP Manual, Dynamic IP DHCP

Get D-Link DAP-3662 PDF manuals and user guides View all D-Link DAP-3662 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Section 3 - Configuration LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-3662. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. After completing the desired LAN settings, click the Save button to let your changes take effect. Get IP From: Select Static IP (Manual) if you do not have a DHCP server on your network, or if you wish to assign a static IP address to the DAP-3662. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. IP Address: The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network. Subnet Mask: Enter the subnet mask. All devices in the network must share the same subnet mask. Default Enter the IP address of the gateway in your network. If Gateway: there is a router/gateway in your network, please enter its IP address. DNS: Enter a DNS server IP address of your choice. In most cases, enter the LAN IP of your router. D-Link DAP-3662 User Manual 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
27
D-Link DAP-3662 User Manual
Section 3 - Configuration
Select
Static IP (Manual)
if you do not have a DHCP
server on your network, or if you wish to assign a static
IP address to the DAP-3662. When
Dynamic IP (DHCP)
is selected, the other fields here will be grayed out.
Please allow about 2 minutes for the DHCP client to be
functional once this selection is made.
The default IP address is
192.168.0.50
. Assign a static
IP address that is within the IP address range of your
network.
Enter the subnet mask. All devices in the network must
share the same subnet mask.
Enter the IP address of the gateway in your network. If
there is a router/gateway in your network, please enter
its IP address.
Enter a DNS server IP address of your choice. In most
cases, enter the LAN IP of your router.
LAN
Get IP From:
IP Address:
Subnet Mask:
Default
Gateway:
DNS:
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-3662. These
settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network
and cannot be seen on the Internet. After completing the desired LAN settings, click the
Save
button to let your changes take effect.