D-Link DCS-2100G Product Manual - Page 47
Advanced, Network - d link reset
UPC - 790069274008
View all D-Link DCS-2100G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
DCS-2100G User's Manual Using the DCS-2100G with an Internet Browser Advanced The Advanced tab provides the following configuration options: Network, Mail & FTP, DDNS & UPnP, Video, Image Setting, and Motion Detection. Network Reset IP Address at next boot: IP address: Subnet mask: Default router: Primary DNS: Secondary DNS: HTTP Port: Control channel port: Audio channel port: Video channel port: Once the DCS-2100G is configured, this box should be unchecked at all times. If the box has been checked and the connection is lost, run the Installation Wizard to find the camera's IP address. Necessary for network identification. Used to determine if the destination is in the same subnet. The default value is "255.255.255.0." The router used to forward frames to destinations in a different subnet. Invalid router settings may cause the failure of transmissions to a different subnet. Primary domain name server that translates names to IP addresses. Secondary domain name server to backup the primary one. Can be set to other than the default port 80. When the administrator changes the HTTP port of the DCS-2100G (which has an IP address of 192.168.0.100) from 80 to 8080, users must type http://192.168.0.100:8080 in the Web browser bar. Can be set to other than the default port 5001 to correspond with the port opened by the firewall. Can be set to other than the default port 5002 to correspond with the port opened by the firewall. Can be set to other than the default port 5003 to correspond with the port opened by the firewall D-Link Systems, Inc. 47