D-Link DCS-4605EV User Manual - Page 9
Installation, Mounting the Camera - test
View all D-Link DCS-4605EV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Section 2: Installation Installation Mounting the Camera It is highly recommended that you configure and test your camera before mounting it. Step 1 Place the mounting sticker where you want to position the camera. Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then insert the wall anchors into the holes. Step 2 If you are running the camera cables through the wall, drill a hole in the center and pull the cables through the hole. Step 3 Use the included wrench to loosen the 4 screws on the top of the camera, then lift the camera cover off. D-Link DCS-4605EV User Manual 9
9
D-Link DCS-4605EV User Manual
Section 2: Installation
Installation
Mounting the Camera
It is highly recommended that you configure and test your camera before mounting it.
Step 1
Place the mounting sticker where you want to position the camera.
Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then insert the
wall anchors into the holes.
Step 2
If you are running the camera cables through the wall
, drill a hole in the center and pull
the cables through the hole.
Step 3
Use the included wrench to loosen the 4 screws on the top of the camera, then lift the camera
cover off.